PHP寫的加密函數,支持私人密鑰(詳細介紹)

PC教程網】關于PHP寫的加密函數,支持私人密鑰(詳細介紹)_加密密鑰介紹:在開發PHP系統時,會員部分往往是一個必不可少的模塊,而密碼的處理又是不得不面對的問題,PHP 的 Mcrypt 加密庫又需要額外設置,很多人都是直接使用md5()函數加密,這個方法的確安全,但是因,下面小編為您針對PHP寫的加密函數,支持私人密鑰(詳細介紹)進行分享:

在開發PHP系統時,會員部分往往是一個必不可少的模塊,而密碼的處理又是不得不面對的問題,PHP 的 Mcrypt 加密庫又需要額外設置,很多人都是直接使用md5()函數加密,這個方法的確安全,但是因為md5是不可逆加密,無法還原密碼,因此也有一些不便之處,本文介紹加密函數支持私鑰,用起來還是不錯的.
代碼如下:
PHP:
教程實例 代碼如下:

<ol><li class="li1"><div class="de1"> </div>
</li>
<li class="li1"><div class="de1"><span class="kw2"><?php</span>
 </div>
</li>
<li class="li1"><div class="de1"><span class="co1">// 說明:PHP 寫的加密函數,支持私人密鑰 </span>
</div>
</li>
<li class="li1"><div class="de1"><span class="co1">// 整理:http://www.jb51.net </span>
</div>
</li>
<li class="li2"><div class="de2"> </div>
</li>
<li class="li1"><div class="de1"><span class="kw2">function</span>
 keyED<span class="br0">(</span>
<span class="re0">$txt</span>
,<span class="re0">$encrypt_key</span>
<span class="br0">)</span>
   </div>
</li>
<li class="li1"><div class="de1"><span class="br0">{</span>
   </div>
</li>
<li class="li1"><div class="de1">    <span class="re0">$encrypt_key</span>
 = <span class="kw3">md5</span>
<span class="br0">(</span>
<span class="re0">$encrypt_key</span>
<span class="br0">)</span>
;   </div>
</li>
<li class="li1"><div class="de1">    <span class="re0">$ctr</span>
=<span class="nu0">0</span>
;   </div>
</li>
<li class="li2"><div class="de2">    <span class="re0">$tmp</span>
 = <span class="st0">""</span>
;   </div>
</li>
<li class="li1"><div class="de1">    <span class="kw1">for</span>
 <span class="br0">(</span>
<span class="re0">$i</span>
=<span class="nu0">0</span>
;<span class="re0">$i</span>
<strlen<span class="br0">(</span>
<span class="re0">$txt</span>
<span class="br0">)</span>
;<span class="re0">$i</span>
++<span class="br0">)</span>
   </div>
</li>
<li class="li1"><div class="de1">    <span class="br0">{</span>
   </div>
</li>
<li class="li1"><div class="de1">        <span class="kw1">if</span>
 <span class="br0">(</span>
<span class="re0">$ctr</span>
==<span class="kw3">strlen</span>
<span class="br0">(</span>
<span class="re0">$encrypt_key</span>
<span class="br0">)</span>
<span class="br0">)</span>
 <span class="re0">$ctr</span>
=<span class="nu0">0</span>
;   </div>
</li>
<li class="li1"><div class="de1">        <span class="re0">$tmp</span>
.= <span class="kw3">substr</span>
<span class="br0">(</span>
<span class="re0">$txt</span>
,<span class="re0">$i</span>
,<span class="nu0">1</span>
<span class="br0">)</span>
 ^ <span class="kw3">substr</span>
<span class="br0">(</span>
<span class="re0">$encrypt_key</span>
,<span class="re0">$ctr</span>
,<span class="nu0">1</span>
<span class="br0">)</span>
;   </div>
</li>
<li class="li2"><div class="de2">        <span class="re0">$ctr</span>
++;   </div>
</li>
<li class="li1"><div class="de1">    <span class="br0">}</span>
   </div>
</li>
<li class="li1"><div class="de1">    <span class="kw1">return</span>
 <span class="re0">$tmp</span>
;   </div>
</li>
<li class="li1"><div class="de1"><span class="br0">}</span>
   </div>
</li>
<li class="li1"><div class="de1"> </div>
</li>
<li class="li2"><div class="de2"><span class="kw2">function</span>
 encrypt<span class="br0">(</span>
<span class="re0">$txt</span>
,<span class="re0">$key</span>
<span class="br0">)</span>
   </div>
</li>
<li class="li1"><div class="de1"><span class="br0">{</span>
   </div>
</li>
<li class="li1"><div class="de1">    <span class="kw3">srand</span>
<span class="br0">(</span>
<span class="br0">(</span>
double<span class="br0">)</span>
<span class="kw3">microtime</span>
<span class="br0">(</span>
<span class="br0">)</span>
*<span class="nu0">1000000</span>
<span class="br0">)</span>
;   </div>
</li>
<li class="li1"><div class="de1">    <span class="re0">$encrypt_key</span>
 = <span class="kw3">md5</span>
<span class="br0">(</span>
<span class="kw3">rand</span>
<span class="br0">(</span>
<span class="nu0">0</span>
,<span class="nu0">32000</span>
<span class="br0">)</span>
<span class="br0">)</span>
;   </div>
</li>
<li class="li1"><div class="de1">    <span class="re0">$ctr</span>
=<span class="nu0">0</span>
;   </div>
</li>
<li class="li2"><div class="de2">    <span class="re0">$tmp</span>
 = <span class="st0">""</span>
;   </div>
</li>
<li class="li1"><div class="de1">    <span class="kw1">for</span>
 <span class="br0">(</span>
<span class="re0">$i</span>
=<span class="nu0">0</span>
;<span class="re0">$i</span>
<strlen<span class="br0">(</span>
<span class="re0">$txt</span>
<span class="br0">)</span>
;<span class="re0">$i</span>
++<span class="br0">)</span>
   </div>
</li>
<li class="li1"><div class="de1">    <span class="br0">{</span>
   </div>
</li>
<li class="li1"><div class="de1">        <span class="kw1">if</span>
 <span class="br0">(</span>
<span class="re0">$ctr</span>
==<span class="kw3">strlen</span>
<span class="br0">(</span>
<span class="re0">$encrypt_key</span>
<span class="br0">)</span>
<span class="br0">)</span>
 <span class="re0">$ctr</span>
=<span class="nu0">0</span>
;   </div>
</li>
<li class="li1"><div class="de1">        <span class="re0">$tmp</span>
.= <span class="kw3">substr</span>
<span class="br0">(</span>
<span class="re0">$encrypt_key</span>
,<span class="re0">$ctr</span>
,<span class="nu0">1</span>
<span class="br0">)</span>
 . <span class="br0">(</span>
<span class="kw3">substr</span>
<span class="br0">(</span>
<span class="re0">$txt</span>
,<span class="re0">$i</span>
,<span class="nu0">1</span>
<span class="br0">)</span>
 ^ <span class="kw3">substr</span>
<span class="br0">(</span>
<span class="re0">$encrypt_key</span>
,<span class="re0">$ctr</span>
,<span class="nu0">1</span>
<span class="br0">)</span>
<span class="br0">)</span>
;   </div>
</li>
<li class="li2"><div class="de2">        <span class="re0">$ctr</span>
++;   </div>
</li>
<li class="li1"><div class="de1">    <span class="br0">}</span>
   </div>
</li>
<li class="li1"><div class="de1">    <span class="kw1">return</span>
 keyED<span class="br0">(</span>
<span class="re0">$tmp</span>
,<span class="re0">$key</span>
<span class="br0">)</span>
; </div>
</li>
<li class="li1"><div class="de1"><span class="br0">}</span>
   </div>
</li>
<li class="li1"><div class="de1"> </div>
</li>
<li class="li2"><div class="de2"><span class="kw2">function</span>
 decrypt<span class="br0">(</span>
<span class="re0">$txt</span>
,<span class="re0">$key</span>
<span class="br0">)</span>
   </div>
</li>
<li class="li1"><div class="de1"><span class="br0">{</span>
   </div>
</li>
<li class="li1"><div class="de1">    <span class="re0">$txt</span>
 = keyED<span class="br0">(</span>
<span class="re0">$txt</span>
,<span class="re0">$key</span>
<span class="br0">)</span>
;   </div>
</li>
<li class="li1"><div class="de1">    <span class="re0">$tmp</span>
 = <span class="st0">""</span>
;   </div>
</li>
<li class="li1"><div class="de1">    <span class="kw1">for</span>
 <span class="br0">(</span>
<span class="re0">$i</span>
=<span class="nu0">0</span>
;<span class="re0">$i</span>
<strlen<span class="br0">(</span>
<span class="re0">$txt</span>
<span class="br0">)</span>
;<span class="re0">$i</span>
++<span class="br0">)</span>
   </div>
</li>
<li class="li2"><div class="de2">    <span class="br0">{</span>
   </div>
</li>
<li class="li1"><div class="de1">        <span class="re0">$md5</span>
 = <span class="kw3">substr</span>
<span class="br0">(</span>
<span class="re0">$txt</span>
,<span class="re0">$i</span>
,<span class="nu0">1</span>
<span class="br0">)</span>
;   </div>
</li>
<li class="li1"><div class="de1">        <span class="re0">$i</span>
++;   </div>
</li>
<li class="li1"><div class="de1">        <span class="re0">$tmp</span>
.= <span class="br0">(</span>
<span class="kw3">substr</span>
<span class="br0">(</span>
<span class="re0">$txt</span>
,<span class="re0">$i</span>
,<span class="nu0">1</span>
<span class="br0">)</span>
 ^ <span class="re0">$md5</span>
<span class="br0">)</span>
;   </div>
</li>
<li class="li1"><div class="de1">    <span class="br0">}</span>
   </div>
</li>
<li class="li2"><div class="de2">    <span class="kw1">return</span>
 <span class="re0">$tmp</span>
;   </div>
</li>
<li class="li1"><div class="de1"><span class="br0">}</span>
  </div>
</li>
<li class="li1"><div class="de1"> </div>
</li>
<li class="li1"><div class="de1"><span class="re0">$key</span>
 = <span class="st0">"www.yitu.org"</span>
;   </div>
</li>
<li class="li1"><div class="de1"><span class="re0">$string</span>
 = <span class="st0">"我是加密字符"</span>
;   </div>
</li>
<li class="li2"><div class="de2"> </div>
</li>
<li class="li1"><div class="de1"><span class="co1">// encrypt $string, and store it in $enc_text   </span>
</div>
</li>
<li class="li1"><div class="de1"><span class="re0">$enc_text</span>
 = encrypt<span class="br0">(</span>
<span class="re0">$string</span>
,<span class="re0">$key</span>
<span class="br0">)</span>
;   </div>
</li>
<li class="li1"><div class="de1"> </div>
</li>
<li class="li1"><div class="de1"><span class="co1">// decrypt the encrypted text $enc_text, and store it in $dec_text   </span>
</div>
</li>
<li class="li2"><div class="de2"><span class="re0">$dec_text</span>
 = decrypt<span class="br0">(</span>
<span class="re0">$enc_text</span>
,<span class="re0">$key</span>
<span class="br0">)</span>
;   </div>
</li>
<li class="li1"><div class="de1"> </div>
</li>
<li class="li1"><div class="de1"><span class="kw3">print</span>
 <span class="st0">"加密的 text : $enc_text <Br> "</span>
;   </div>
</li>
<li class="li1"><div class="de1"><span class="kw3">print</span>
 <span class="st0">"解密的 text : $dec_text <Br> "</span>
;   </div>
</li>
<li class="li1"><div class="de1"><span class="kw2">?></span>
 </div>
</li>
<li class="li2"><div class="de2"> </div>
</li>
</ol>

每一次加密后的結果是不一樣的,大大加強了密碼的安全性.

相關教程

C語言中的內聯函數(inline)與宏定義(#define)詳細解析

先簡明扼要,說下關鍵: 1、 內聯函數在可讀性方面與函數是相同的,而在編譯時是將函數直接嵌入調用程序的主體,省去了調用/返回指令,這樣在運行時速度更快。 2、 內聯函數可以 …

5個常用的MySQL數據庫管理工具詳細介紹

5個常用的MySQL數據庫管理工具詳細介紹

1、phpMyAdmin phpMyAdmin是最常用的MySQL維護工具,是一個用PHP開發的基于Web方式架構在網站主機上的MySQL管理工具,支持中文,管理數據庫非常方便。不足之處在于對大數據庫的備份和恢復 …

Lua中讓回調函數支持回調對象方法的解決方法

在 Cocos2d-Lua 中,存在很多異步或延遲的操作,例如后臺加載圖片、等待一定時間執行代碼等。這些功能的函數通常要求傳入一個 function 作為參數。 教程實例 代碼如下: -- 在后臺加載一 …

基于PHP中的常用函數回顧

array_change_key_case — 返回字符串鍵名全為小寫或大寫的數組 array_chunk — 將一個數組分割成多個 array_combine — 創建一個數組,用一個數組的值作為其鍵名,另一個數組的值作為其值 arra …

編寫Smarty插件在模板中直接加載數據的詳細介紹

之前使用smarty的時候,通常是在php程序端讀取數據(一般從數據庫),然后assign給模板的變量,才可以在前端使用這個變量。這樣不是不好,只是數據多的時候php端的代碼維護起來有點 …

用ASP編寫的加密和解密類

classBase64Class remConst dimsBASE_64_CHARACTERS'轉化碼 dimlenString'計算字符串的長度 dimiCount'計數器 dimreturnValue'返回值 dimtempChar'緩存字符 dimtempString'緩存字符串 dimparamString'參數字符串 dimtemHex'緩存 …

詳細介紹Python中的偏函數

Python的functools模塊提供了很多有用的功能,其中一個就是偏函數(Partial function)。要注意,這里的偏函數和數學意義上的偏函數不一樣。 在介紹函數參數的時候,我們講到,通過設定 …

Shell中的函數、函數定義、作用域問題介紹

說起函數調用,相信大家也不會陌生,然而對于初學Shell的我來說,Shell中函數調用方式卻有點讓我不太習慣,自己也走了不少的彎路,因為傳遞參數時出了一個很“自然”的錯誤,也讓 …

ECMAScript6的新特性箭頭函數(Arrow Function)詳細介紹

箭頭函數是ECMAScript 6最受關注的更新內容之一。它引入了一種用「箭頭」(=)來定義函數的新語法,它…它碉堡了~。箭頭函數與傳統的JavaScript函數主要區別在于以下幾點: 1.對 this 的 …

内蒙古十一选五任五推荐号